Thermoplastic Rubber Swivel Grip Ring Stem Caster - 3" x 1.25" Gray Wheel and 7/16" Stem & Top Locking Brake - 210 lbs Capacity/Caster - Service Caster Brand
CA$41.95
- These Service Caster Series #20 Thermoplastic Rubber casters offer various wheel sizes and mounting heights: 3” Wheel: 4-1/8” mounting height; 3-1/2” wheel: 4-5/8” mounting height; 4” wheel: 5-1/8” mounting height; 5” wheel: 6-1/8” mounting height; 6” wheel: 7-1/8” mounting height.
- Weight Capacity: 3": 210 lbs Capacity/Caster, 3.5": 230 lbs Capacity/Caster, 4": 250 lbs Capacity/Caster, and 5" & 6": 300 lbs Capacity/Caster
- All casters feature a 7/16” diameter by 1-3/8” long grip ring stem. Service Caster recommends using a drill or hardware gauge, a 7/16” wrench, or our paper wrap method to ensure the grip ring stem diameter needed is 7/16”. Paper Wrap Method: take a small strip of paper and wrap it around the stem. Mark the paper with a pen where it overlaps, keep the wrap tight. Measure the strip from the start of the wrap to the mark. The ruler should measure 1-3/8". Don’t see the size you need? Call us!
- Brake options include a top lock brake, a total lock brake, or a posi lock brake. The top lock brake places a positive locking force against the wheel tread locking the wheel only. The total lock brake simultaneously locks the wheel and the swivel for a complete stationary position. The posi lock brake places a positive locking force against the wheel tread similar to the top lock brake, but the pedal is located above the wheel tread rather than on the side of the wheel.
SKU
SCC-GR20S314-TPRB-TLB-716138
Listing is for one (1) Service Caster Series #20 swivel caster with a 3" diameter by 1-1/4" wide thermoplastic rubber wheel and a 7/16" grip ring stem with brake capable of supporting 210 lbs./caster. When searching for a reliable and durable solution to your caster needs, consider Service Caster’s Series 20 thermoplastic rubber casters. The Service Caster Series #20 is ideal for light and medium duty material handling, carts, equipment, and shop projects. The zinc plated finish provides durability under any condition, and the soft, quiet and non-marking thermoplastic rubber wheels perform especially well on hard surfaces such as concrete, tile, and wood. They are resistant to water, oil, and grease and will keep you safely moving forward. Mounting options include top plate, bolt hole, grip ring stem, standard and metric threaded stem sizes. Service Caster is unsurpassed in quality, reliability, and excellent customer service. Count on us to move you forward.
| Durometer | 75A |
|---|---|
| Heat Capacity | -20 degrees F to 180 degrees F |
| Load Height | 4-1/8" |
| Locking Type | Top Lock Brake |
| Lower Temperature | -20 |
| Material Type | Thermoplastic Rubber Tread on Polyolefin Core |
| Maximum Temperature | 180 |
| Mounting Height | 4-1/8" |
| Mounting Type | Grip Ring Stem |
| Plating/Coating | Bright Zinc Plated Finish |
| Locking Castersor Wheels | Yes |
| Swivels | Yes |
| Size | 3" Wheel |
| Stem Size | 7/16" x 1-3/8" Grip Ring Stem |
| Stem Diameter | 7/16" |
| Stem Length | 1-3/8" |
| Stem Type | Grip Ring Stem |
| Tread Width | 1.25 |
| Wheel Bearing | Precision Ball Bearing |
| Wheel Diameter | 3 |
| Wheel Material | Thermoplastic Rubber Tread on Polyolefin Core |
| Wheel Size | 3" x 1-1/4" |
| Wheel Type | Thermoplastic Rubber Tread on Polyolefin Core |