M System with Chrome Plated Brass Body & Stainless Steel Probe
M System Keg Valve is used by polish and German breweries like Schneider brewery , Aventinus, Veltins Beer (C. & A. VELTINS GmbH & Co. KG ) , Zywiec brewery poland and Einbecker Eisbock etc. Some call it ” Small Pin German Slide ” type keg tap dispense coupler
It looks like A system dispense head coupler but its probe is different,
look at bottom of coupler to know exact difference!
Please note that Krome inventory changes daily and not all products are always immediately available. We will contact you with an ETA if a product is out of stock.
M System with Chrome Plated Brass Body & Stainless Steel Probe (C5013)
M system Keg coupler Chrome-plated Body SS Probe
Keg coupler for tapping beer kegs with M system valve. Simply slide this coupler over the valve and press down to open it.
The coupler body is made of Brass with Chrome plating while the probe is of Stainless steel 304 grade. So this ensures your beer is always in contact with SS only.
M system is a recent entrant in the US market which predominantly uses D type kegs.
Check out our other system keg couplers too for other beer styles you enjoy.
M type keg couplers are used to dispense a few German beers. Notable among them are Aventinus, Einbecker, Schneider, and Veltins.
Always use the same coupler type as your keg. If you are unsure about the keg you have, Checkout our complete Keg Coupler List.
- Handle with CO2 Safety PRV.
- Solid Stainless Steel 304 Probe resistant to chemicals. Body made of Chrome plated Brass.
- Fits M System Keg Valves
Specifications
Body Material | Brass |
Probe Material | Stainless Steel 304 |
Handle Type | Eagle Handle |
Inlet Thread | 5/16" Barb |
Probe Thread | 5/8" BSP |
PRV - Pressure Release Valve | With PRV |
Standard Packing | 12 |
Height | Less than 20" |
---|