Secondary Regulator, 5P5P, 5/16" Barb In/Thru, 5/16" Barb Shut-offs, 60lb Gauges
Premium Taprite 5-Way Secondary Pass-Thru CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.
Solid brass body with 5/16" OD nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports. The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from Polycorbonate. The regulator is approved for CO2.
Premium Taprite 5-Way Secondary Pass-Thru CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.
Solid brass body with 5/16" OD nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports. The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from Polycorbonate. The regulator is approved for CO2.
Pass-Thru regulators have 5/16" OD barbs on each side allowing you to attach tubing.
Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.
A secondary regulator will allow you to regulate the pressure of each keg individually.
Features 5/16" OD barbed shut-off valves.
Specifications:
- To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
- Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
- Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
- Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2
- Pass-Thru design allows full pass-thru through the body
- Polycorbonate Bonnet
- 5/16" OD barbed inlet (Right hand thread)
- Body parts are 1/4" NPT (Right hand thread)
- 5/16" OD barbed shut-off valve outlets (Right hand thread)
- Working Pressure Range 0-50 PSI
- Front loading seat assembly is easily replaceable in the field
- Comes with wall mounting brackets
- 0-60 PSI low pressure gauges (Right Hand Thread)
Height | Less than 20" |
---|